Source Factory · Since 2011 | OEM / Private Label | Wholesale
Get in Touch →

Language:

YN8700 Spray-Gun Underbody Coating (Anti-Rust / Sound / Impact) 1000ml

跃能实业 Underbody Coating

  • Made from imported rubber and resin using German compounding technology. Spraying forms a durable, ageing-resistant elastic and corrosion-resistant protective layer, with excellent anti-corrosion, anti-rust, sound-deadening, impact resistance, sealing, repair and protection.

  • Read the instructions, directions and warnings before use to ensure safe and correct application.

    Raise the vehicle on a lift, clean the underbody with a cleaner to remove mud, oil and other debris, expose the bare metal surface and let it dry. Shake the product up and down before use, set the compressor to at least 6 bar, and spray with a professional spray gun from 30 to 40cm. Allow at least 15 to 20 minutes between coats, or wait until fully dry, for the best result.

  • Keep away from high surfaces, sparks and open flame when spraying. Use only in a ventilated area. Avoid inhaling the spray. Storage temperature must not exceed 49°C. Do not place the product in high heat or direct sunlight. After applying underbody coating, avoid rough roads for about 24 hours while the coating is still curing.

  • Pack size：
    1000ml / bottle

YUENENG anti-rust, sound-deadening and impact-resistant underbody coating is based on rubber and resin. Once fully dry it forms a durable, ageing-resistant elastic and corrosion-resistant protective layer that resists cracking at low temperatures. As a composite of several rubbers and resins, the dried film adheres well to a cleaned underbody and can replace PVC coating, with excellent rust prevention and sealing.

YN8701 Aerosol Underbody Coating (Anti-Rust / Sound / Impact) 550ml

跃能实业 Underbody Coating

  • Made from imported rubber and resin using German compounding technology. Spraying forms a durable, ageing-resistant elastic and corrosion-resistant protective layer, with excellent anti-corrosion, anti-rust, sound-deadening, impact resistance, sealing, repair and protection.

  • Instructions: use at room temperature. Clean the area to be coated until free of dust, oil and rust, and let it dry. Shake the can hard until the mixing ball rattles, then keep shaking for at least 15 seconds. Apply the coating evenly to the underbody or other surface, holding the can 40 to 50cm from the surface. After each use, invert the can and press the nozzle for at least 2 seconds to clean the valve and prevent blocking.

    For a new car, first remove the protective oil layer from the underbody before applying.

  • Use at room temperature. Do not apply coats too thickly, otherwise the coating sags and loses its textured finish. Keep away from hot surfaces, sparks and open flame when spraying. Use in a well-ventilated area and avoid inhaling. Keep out of reach of children and store in a cool place, away from direct sunlight or high temperature.

  • Pack size：
    550ml / bottle

Made from imported rubber and resin using German compounding technology. Spraying forms a durable, ageing-resistant elastic and corrosion-resistant protective layer. Excellent anti-corrosion, anti-rust, sound-deadening, impact resistance, sealing, repair and protection. Suitable for underbodies, bumpers, bonnets and chassis rails of all vehicle types, as well as household and construction waterproofing.